OnBid - International Bid and Tender Opportunities Worldwide!

Solicitation Number:

MARKET-SURVEY-5203-1

Notice Type:

Sources Sought

Synopsis:

FOR ALL INFORMATION PLEASE CONTACT: Mitch Jacquay 443-861-4396 mitchell.a.jacquay.civ@mail.mil

You must respond NO LATER than the Respond Date and Time
The ACC-APG -C4ISR intends to acquire the following:
56 each Non-standard commercial export AN/PVS-22 GEN III FOM 1800 to include: UNS with autogated pinnacle tube, Soft storage/Carry Case, Objective Lens Cover, Out-Put Lens Cover, Interface mount (for use with) Picatinny rail, Shock Mitigation System (SMS), AA Batteries, (2) two each Instruction Cards (Plastic Coated), Users Manual, Light Shroud.
Salient Characteristics:
Figure of Merit: 1800
Autogated Tube
Resolution: 4.2 cy/mr
Resolution: 72 lp/mm
S/N: 25 minimum
Halo: 1.0mm
Magnification: Unity
Field of View: 10 minimum
Focus Range: 20m - infinity
Boresight Accuracy: 1MOA
Boresight Repeatability: .5MOA
Controls: on/off, gain, focus
Mount: Quick Attach/Detach to Mil-STD-1913 Rail
Operating temperatures: -40 C to +60 C
Submersion: 20m 1 hour
Power: AA batteries

Weapon Mount: Interface to mil STD 1913. To be used on Cal.308 HK 417, Cal.300WM Accuracy International and Cal.338 LM Sniper Rifle.

Warranty: 1 year

30 each Contractor Furnished Spare Parts consisting of the following: UNS Soft Carry Bag (Black), UNS Batter Door with O Ring, Battery Door Hinge Pin, UNS Objective Lens Cover, UNS Out-Put Lens Cover, Light Shroud.

In-Country Operator Maintenance Training consisting of the following: (8) eight hours of training for (2) two Norwegian military personnel to include proper use of the AN/PVS-22 system on weapons with live fire nighttime training session. Instruction course on replacement of miscellaneous spare parts offered in the
quote.


REQUIRED INFORMATION:

1. If you are a reseller/distributor you MUST disclose the manufacturer of the Tubes.

2. You MUST state delivery ARO of all HARDWARE.

3. If you are a reseller/distributor you MUST disclose the manufacturer of ALL ITEMS listed.

4. If you are a reseller/distributor you MUST provide certification that Night Vision Tubes are NOT Russian made.

5. You MUST reference the FMS case designator on your formal solicitations.
6. Image Intensifier Tube data sheets for each tube with serial number will be requested after contract award

7. There will be a potential call for an incoming inspection by DCMA to check tubes and tube housings

8. A quality system on tubes and tube housings will be requested after contract award.

9. Identify whether you are a small or large business

10. If you are a small business then identify your subcategory, i.e. 8A, SDB, SDVOB, etc.

Respond to My Attention by 11 AM Eastern on 27 January 2011
mitchell.a.jacquay.civ@mail.mil
Army Contracting Command-Aberdeen Proving Ground-C4ISR
N/A
Army Contracting Command-Aberdeen Proving Ground-C4ISR
21005
US

Contracting Office Address:

ACC-APG (C4ISR), HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE, ABERDEEN PROVING GROU, MD 21005-1846

Place of Performance:

ACC-APG (C4ISR) HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE ABERDEEN PROVING GROU MD
21005-1846
US

Point of Contact(s):

Tineka C. Davis, 443-861-5438

ACC-APG (C4ISR)